Entry Fit™ KF-Series Pre-Finished Kerf Steel Door Frames for Interior and Exterior Application

Designed for new construction or remodel in high rise, assisted living, hotel, motel, office or residential applications.

Entry Fit™ KF-Series Pre-Finished Kerf Steel Door Frames for Interior and Exterior Application

Designed for new construction or remodel in high rise, assisted living, hotel, motel, office or residential applications.

Features & Specifications

  • 12 standard wall sizes 4 1/2″ to 7 3/8″ , other custom sizes available
  • Kerf fixed throat frame option
  • Available for 1 3/8″ and 1 3/4″ doors
  • Frames are constructed of corrosion resistant galvannealed steel
  • Hinge preps: 3 1/2″, 4″ and 4 1/2″
  • 4 7/8″ ANSI Strike Prep (STANDARD)
  • 2 3/4″ T-Strike Prep, 2 3/4″ Deadbolt Strike Prep (OPTIONAL)
  • Standard frame is reversible in 6’8″ and available in 7’0″ heights (left hand or right hand swing)
  • Pre-finished metal casing to match frame (1-1/2″ width)

Colors & Finishes

IDP White

Standard Colors

Optional Colors

Special Order Colors

Please note, due to the differences in monitor display settings and/or print quality, the actual color may vary. Please contact sales for color matched samples.

Sill Options

Click an option below for more information.

Fire Ratings

  • Independent agency, Warnock Hersey, tests and monitors frames and labels to ensure all frames meet or exceed the listed fire ratings.
  • Labels are tamper proof. If you see this label, the frame meets IDP Inc. high quality standards and the listed fire rating.
  • Mylar labels have a mask applied to be removed after installation and final finish is applied.

Fire Rating Certification Details for IDP Entry-Fit™ F-Series and KF-Series Frame Products *

Rating Max Door Opening Width Max Door Opening Height Min Wall Size Min Wall Size KF-Series Gauge Test Standard Edge Seals for Cat A Doors Edge Seals for Cat B Doors
90 Min. Single 4’0″ 7’0″ 4-1/2″ 5″ 18 Positive Pressure No Additional Edge Seals Required Additional Category G Edge Seals Required
90 Min. Single 3’0″ 8’0″ 4-1/2″ 5″ 18 Positive Pressure No Additional Edge Seals Required Additional Category G Edge Seals Required
90 Min. Pair 6’0″ 8’0″ 4-1/2″ 5″ 18 Positive Pressure No Additional Edge Seals Required Additional Category G Edge Seals Required
20 Min. Single 3’0″ 8’0″ 3-1/2″ 5″ 18 Positive Pressure No Additional Edge Seals Required Additional Category G Edge Seals Required

 

* Single Swing: Cross bracing at latch height must be used for metal stud walls
* Standard Pairs: Cross bracing 24″ on center and double studs at each opening for metal stud walls
* Wood trim (pine or solid wood with an equal or greater density) is allowed for a reduced fire rating of 60 minutes

Get a Quote!

Please fill out your name and phone number in the form to the right and an IDP associate will give you a call to discuss a quote as soon as possible.


    Attach Specifications (optional)